Saya Wavetech

Preparations
Treatment Guide
Sheet Mask
In this section you will find instructions for performing Miracle Wave® Facial Treatment, Wave Type 1, 2 and 3.
Wave Level setting: For sensitive skin 2 to 4. For normal skin 5 to 8.
Recommended treatment time: 15 minutes.
The sliver gloves should be well moistened throughout the treatment. If gloves become dry, spay them with water or any oil-free moisturizing lotion.
Do not rub or massage, and let the gloves do the work, and always use both hands simultaneously without letting the gloves touch each other. This does not pose any danger but reduces effectiveness.
The hand pressure placed on the skin should be firm throughout the treatment.
Wave Type 1:
This initial setting is used for the client to relax and warm up, getting ready for the next step of the treatment.
Each hand position should be held for 10 to 20 seconds.
Place gloved hands on the lower cheek and jawbone area, slightly lifting outward and upward fashion and hold for 20 seconds. Place hands on the entire cheeks and slightly lift outward and upward fashion and hold for 20 seconds. Place one hand on the forehand and pull slightly toward hairline. Place the other hand on a cheek and slightly lift outward and hold for 20 seconds.
Repeat this cycle of treatment before proceeding to Wave Type 2 Treatment. A short beep informs that the Wave Type 1 changed to Wave Type 2 and Wave Type indicator indicates Wave Type 2.
Repeat the same on other side. Place one hand on the forehead and place fingers of the other hand lightly on the side of the nose. Hold for 10 to 15 seconds.
Wave Type 2:
This setting is the strongest wave type to focus on tightening of the area treated in Wave Type 1.
Each hand position should be held for 15 to 30 seconds.
Place hands on forehead firmly and extend fingers on temples. Lift slightly upward and outward using firm pressure. Hold for 15 to 20 seconds. Place one hand on forehead and place the other hand on the entire chin area and hold for 15 to 20 seconds. Repeat the same on the other side. Place thumbs gently on upper part of the cheekbones and with all other fingers lift cheeks against cheekbones. Hold for 15 to 20 seconds.
Wrap around the entire cheekbone areas, using thumbs and index fingers and extend other fingers on the side of the face and jaw area. Hold for 15 to 20 seconds. Place one hand on the side of the face and lift slightly upward. Place the other hand on the forehead and place fingers on the temple area and lift slightly upward. Hold for 15 to 20 seconds. Place fingers of both hands on the eyebrows and lift lightly upward. Hold for 15 to 20 seconds.
Repeat this cycle of treatment before proceeding to Wave Type 3 Treatment. A short beep informs that the Wave Type 2 changed to Wave Type 3 and Wave Type indicator indicates Wave Type 3.
Place fingers on temples and eyebrow area and lift toward the hairline and hold for 15 to 20 seconds. Place fingers on the forehead and lift toward hairline. Hold for 10 to 15 seconds.
Wave Type 3:
This setting is used for fine-tuning in the areas that require delicate treatment such as around the eyes, mouth and crow's feet.
While placing the hands on the upper side of the face, place thumbs delicately on the inner edges of the eyes. Hold for 10 to 15 seconds. While placing the hands on the forehead, place finger on both edges of the eyes and slightly pull upward and outward. Hold for 10 to 15 seconds. While placing one hand on the lower side of the face and a thumb along the nose starting on the inner edge of the eye, place the other thumb on the edge of the eyebrow. Hold for 10 to 15 seconds. Repeat on the other side.
While placing fingers on inside edge of an eye, place fingers of the hand on crow's feet and pull slightly toward temple. Hold for 10 to 15 seconds. While supporting the face with one hand, fold lips between fingers. Hold for 10 to 15 seconds. Repeat the same on the other side.
Repeat this cycle of treatment. A long beep will inform operator of the completion of the Miracle Wave® Treatment.
Make sure to hydrate well with moisturizer or lotion after the treatment.

Remove the buttons of lead wire from the gloves first and remove silver gloves and insulator gloves.
Remove the connector of the silver glove lead wire from the unit and disconnect AC adapter.
Do not handle AC adapter and lead wire with gloved hands.

Wash the sliver gloves, and hang to dry. You may also sterilize.
See the instruction for Maintenance of Silver Gloves.
Place both hands on the entire face firmly. Lift up outward and upward fashion until the completion of the treatment time.




Copyright 2008. Saya Wavetech, Inc.